不繡鋼1.4313是馬氏體級，耐腐燭性強，熱清理后耐用度性好。X3CrNiMo13-4鋼的機制使用功能是原因無機化學好分中鉬和鎳的高份量。等合金屬加入劑限制了不斷增加級碳份量的必須——給定溶液濃度非常于奧氏體不繡鋼。而是鎳份量不太高，但鎳份量約為4%，不錯增長了鋼對一些腐燭的氛圍的抵御力——二級機制使用功能。X3CrNiMo13-4鋼顧客可制造高達獨角獸300℃在溫濕度下工作上的配件和配件，并且 爆出在一些腐燭的氛圍中的配件，此外保持良好有足夠的面上前提括抗氯化物規定性)。QT650.QT780和QT900前提下，熱清理后最經常交由槽鋼。半原料用作變壓器油制造.化工品.在冶金工程和再生資源服務行業，鍋輪機爆出在高性情溫和溫度下.泵.再冰柜壓縮機部位。鋼隱疼合激光焊接。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50供給EN1.4313馬氏體不銹鋼材料具備退火處理的特點（+A）心態、蘸火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，要求哪1個相應要跟業務流程說知道哦。